Breathtaking Info About How To Clean Up Ethidium Bromide

Some will just use 70% ethanol and restrict this area/machine and assigned it for ethidium bromide stuff forever.

How to clean up ethidium bromide. Thus, the answer is, as almost always, it depends: Place gels into a sealable plastic bag; Ethidium bromide is a toxic chemical and a mutagen.

• for minor spills of low concentration (e.g. Wash the area with a paper towel soaked in decontamination solution. Up to 10 ml of 10 mg/ml etbr) after wiping up the spill, wipe the area down with a 50:50 mixture of ethanol and water.

Some people will use decon (detergent) to remove it. Then rinse the area five times with paper towels soaked with tap water, using a fresh towel each. In any case you will want to avoid brushing and dusting off the contaminated surface to reduce the formation of ethidium.

Use soap and water mixture (detergent solution) or 70% ethanol to wipe clean laboratory work surfaces contaminated with ethidium bromide. It's a uv table, built from glass and metal (stainless steel, i. Clean up liquid spills by absorbing.

Place a no.1 whatman filter (or equivalent porosity of 11 micron), in a filtering funnel, the funnel into a filtering flask, and connect to a vacuum pump or aspirator. Sharps contaminated with ethidium bromide (needles, syringes, slides, broken glass, etc.) which contain residue must be discarded into an infectious waste sharps container. Activated charcoal absorption procedure ( using.

Ethidum bromide can be desroyed easlirly by only javel water. Ethidium bromide solutions and buffer solutions containing ethidium bromide should be filtered, decontaminated, or destroyed using one of the methods below or collected as chemical waste. I want to clean up some old equipment that was used to visualize nucleic acids with ethidium bromide.